6007 2RS/ZZ/OPEN Bearing

35x62x14 Bearing is a 60 series deep groove ball bearing produced by our company. RUWH is a famous brand of bearings in China, 6007 2RS/ZZ/OPEN  Automobile Deep groove Ball Bearing, size 35*62*14mm, precision according to customer requirements, material Gcr15, quality P6 Z3V3, P5 Z4V4. If you need to order, don't hesitate to contact us!

Open Deep Groove Ball Bearings: One of the most commonly used bearings, the open types are manufactured without seals to allow for the free circulation of either oil or grease, used in gearboxes and other environments where no foreign matter would be present and a lubricant supply is available.
Benefits: Used widely in transmissions etc, can be used in oil or greased, cost effective solution

Single row deep groove ball bearing 35mm inside x 62mm outside x 14mm width

Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

Principal Dimensions
Inside diameter d: 35mm
Outside diameter D: 62mm
Width B: 14mm

Basic Load Ratings
Dynamic: 16,8kn
Static: 10,2kn

Speed Ratings
Reference speed: 24000 r/min
Limiting speed: 15000 r/min

Deep groove ball bearing production flow chart

Ordering Instructions for Deep Groove Ball Bearings

Ningbo Renhe Machinery Bearing Co., LTd is a China bearing manufacturer, please save our email(pauline@ruwhbearing.com) or send us an inquiry!