Industry knowledge

The cause of abnormal bearing noise

2018-07-30
►Large metal noise
Reason 1: Abnormal load, countermeasure: Correct the fit, study bearing clearance, adjust and load, and correct the position of the housing shoulder.
Cause 2: Poor installation, countermeasures: Machining accuracy of shaft and outer casing, improvement of mounting accuracy, and installation method.
Cause 3: The lubricant is insufficient or unsuitable. Countermeasure: Replenish the lubricant and select the appropriate lubricant.
Cause 4: The rotating parts are in contact. Countermeasure: Modify the contact part of the curved path seal.

►Regular noise
Cause 1: Indentation, rust, or scratch on the rolling surface due to foreign matter. Countermeasures: Replace the bearing, clean the parts, improve the sealing device, and use a clean lubricant.
Cause 2: (after steel carburization) surface deformation, countermeasures: replace the bearing, pay attention to its use.
Cause 3: The raceway surface is peeled off. Countermeasure: Replace the bearing.

► Irregular noise
Reason 1: The clearance is too large. Countermeasure: Study the fit and bearing clearance, and modify the preload.
Reason 2: Intrusion of foreign matter, countermeasures: Study replacement of bearings, cleaning related parts, improving sealing devices, and using clean lubricants.
Cause 3: Spherical injury, peeling, countermeasure: Replace the bearing.
0086+13958298821
pauline@ruwhbearing.com